This should set the computer to default to these settings while in display mode. Step 6: click the drop-down menu for "Displays" and select the projector Display. Step 5: Make sure that you click "Apply" in the bottom right hand corner Step 4: Under "Refresh Rate" make sure it reads 60Hz, if it doesn't then click the drop-down menu and change it to 60Hz If it doesn't, then click on the drop-down arrow and change it.
Step 3: Under "Resolution" make sure it reads 1280x720. Step 1: Right click on the desktop screen and select "Intel Graphics settings" When connected to the Dell Latitude 2-in-1 laptops, sometimes the projector in 210E will begin to project and then flicker the computer display on and off.įix 1: If you are connected to the HDMI cord make sure that it is firmly plugged into the port in the third hole from the left on the tables.įix 2: If the Flickering continues, or if you notice that when the display flickers off it reads "HDMI out of range" on the top right corner of the screen then it is because the graphics output of the computer is not set to the same as the graphics range for the projector.
Posted by Nicholas Schoob on 22 February 2019 04:20 PM
0 kommentar(er)
